Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
How It Works
Pure Paint applies and dries like any other paint, but with nearly double the coverage and none of the toxins. Its waterproof yet microporous nature allows the substrate to breathe, preventing trapped moisture and rot, ensuring durability. Guaranteed to respect both your health and the health of the planet, Pure Paint is the only choice for creating truly healthy homes and spaces.
From coverage to clean up, the process is simple:
- Step 1: Prepare
Shake the container well, stir, and pour only what you need into a tray or container. Make sure your surface is clean, dry, and primed.
- Step 2: Apply
Apply paint using a 6mm (1/4”) or 10mm (3/8”) fabric/microfiber roller or fine bristle brush to a prepared surface. For a consistent finish, we recommend you cut and blend your corners and edges as you go. Smooth and blend any brush strokes with roller before they dry for an even and luxurious finish.
- Step 3: Dispose
Once finished, clean up with soap and water and dispose of it as household waste. Leftover paint is compostable and containers are reusable/recyclable.
Information on Finishes
Primer: Providing the optimal base coat, we recommend you start all projects with a coat of Origins Primer.
Matte: With a completely shine-free finish, Matte withstands infrequent washing and is recommended for any room. Its thick and smooth application provides a luxurious finish.
Velour: With a rich finish that is easy to clean, Velour is recommended for high traffic areas.
Satin: With a silky finish, Satin is generally recommended for surfaces that require frequent cleaning or areas prone to dampness.
|
FINISH |
Surfaces |
Coverage (1L) |
Dilution |
Dry to touch |
Recoatable |
|
Primer |
Walls, ceilings, woodwork - Supports: primers, old paint with primer touch-up, plaster, dry walling, heterogeneous porosity wood and generally all non-homogeneous supports. |
8 to 12 m²/L, 86 - 129 sq ft/litre |
Pneumatic: 10% Airless: 5% Roller/Brush only if necessary: 5%
|
60 mins |
4 to 6h at 23°C - 8 to 12h if t°< 20°C |
|
Matte |
Walls, ceilings in interior dry rooms. Supports: plaster, dry walls, Fermacell, wallpaper, glass fabric, etc. |
13.5m²/L/coat, 145 sq ft/L/coat applied using 10 mm roller in single coat, 16m²/L/coat , 172 sq ft/L using a 6mm roller in two coats.
|
With water: If necessary, 5% using a brush or roller as 1st coat. Airless: 5%, Paint station: depends on the equipment. |
30 mins |
6 to 8h at 20°C as 2-coat system |
|
Velour |
Walls, ceilings, interior doors and windows - Supports: plaster, drywalling, Fermacell, wallpaper, glass fabric, wood, etc. |
14 m²/L/coat,150 sq feet/L/coat (52.98 m²/gallon/coat, 567 sq ft/gallon/coat on dry smooth primed support(30/35μm)
|
Pneumatic: 10%, Airless 5%, Roller/Brush only if necessary 5% |
70 mins |
24h at 20°C - 36 - 48h if t°< 16°C |
|
Satin |
All rooms + Kitchens, bathrooms, children’s rooms, door/window frames. Supports: plaster, drywalling, Fermacell, wallpaper, glass fabric, wood, etc. |
20m²/L/coat, 215 sq ft/litre/coat or, 75.6 m²/gallon/coat, 812.7 sq feet/gallon - using varnish or 6mm roller, 17m²/L, 182u sq f/L or 64 m²s or 688 sq ft /gallon using a 10mm (embossed aspect)
|
With water: if necessary 5% with a brush or a roller as 1st coat. Airless: 5%, Paint station: depends on the equipment. |
70 mins |
24h at 20°C - 36 - 48h if t°<16°C |
|
|
|
|
|
|
|
Invalid password
Enter